|Payment Type:||L/C,T/T,Paypal,Western Union|
|Terms of Trade:||FOB,CFR,CIF,FCA,CPT|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||30 Days|
Model No.: BB2 (DSHJ or GSJH)
Impeller Number: Multistage Pump
Working Pressure: High Pressure Pump
Influent Type of Impeller: Single Suction Pump
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Usage: Ash Pumps
API 610-BB2 Single-Stage Between-Bearing Radially Split Pumps
This type is between-bearings radially spilt process pumps are designed for smooth, reliable operation and fully meet the specifications requirements of ISO 13709/API-610 to assure extended service life.
Size: 1-24 inches
Capacity: 15-4500 m3/h
Temperature: 0-210 °C
Material: Cast steel, SS304, SS316, SS316Ti, SS316L, CD4MCU
Design:Full compliance with API610 8th edition specification
1.The casing is axially split with the suction and discharge branches located in the lower half,so it allows the complete pump rotor with bearings to be removed for maintenance without disturbing the main pipework and valves.Short inspection and maintenance times
2.Impeller is symmetrically arranged.Rotor is in hydraulic balance.
3.Double volute casing reduced radial thrust and bearing loads.
4Large branches.Low flow velocities and high forces and moments accommodated.
5.Sizes of seal champer comply with API682 specification.Seal champer is designed to accommodate all single,tandem,dual and cartridge seal configurations.Cartridge seal is standard type.
6.Replaceable wear beings prevent the main components from being worn out.
7.Generous shaft diameter,small span.Reduce shaft deflection.Increase seals and bearing life.
8.Heavy duty rotor bearings.Special stiffness design makes the bearings run reliably.
9.Flexible spacer membrane coupling.
10Optional instrumentation to monitor temperature,pressure and ib-ration,etc.
11.Welded common baseplate with drain rim.
The pumps are suitable for pumping clean liquids or liquids with soe tolerance of slight contamination by solids.They are used for pumping liquids for petrochemical process,for water supply and treatment,as marine ballast and cooling water pumps,in sea water desalination plants,for offshore duties.As well as being used for other similar usefulness.SHS pumps can also be used as energy recovery turbines.
1.Wide choice of hydraulic,good NPSHr performance,high efficiency,wide perfect region,power saving and low consumption.
2.Reliability:Every products is well checked before shipment.
3.Manufacture:excellent equipment,high-class staff,top-ranking products.
4.Service:rapid service,lifetime maintenance.
Damei Kingmech Pump Co., Ltd. is a professional Chinese pump manufacturer of industrial pumps. Adhering to the principle of providing to customers quality equipment in need, our company has developed rich types of pumping equipment and parts, such as slurry pumps, API 610 pumps, chemical pumps, sewage pumps, magnetic drive pumps and clean water pumps. All these products have been widely applied in mining, metallurgy, coal mining and petrochemical production, power generation, water supply and sewage drainage and treatment and etc. Their good quality and highly reliable performance have helped them win trusts and favors from customers. Meanwhile, quality pump valves and related accessories are available for users.
Our factory was established in 2007 and has formed a scale of "220.127.116.110", i.e., 3 production bases, 10-year rich experiences, 30 expert engineers, 300 loyal clienteles. Supported by a highly skilled technician team specialized in pump design, prototyping and testing, DAMEI grew quite quickly in the past years and has developed rich quality pumping equipment according to satisfy the changing needs of market. As our products draw increasing attentions from global customers, we start to establish a professional team of sales consultant. They are excellent in
on-site assessment and troubleshooting, helping you with equipment inspection, alignment of pumps and motors, commissioning of pumping systems.
The head office of our company is located in Shijiazhuang city, covering a floor space of 750m2. Now, over 20 professional employees are working there. The three plants we have established are respectively located in Shijiazhuang(slurry pump),Dalian(chemical pump),Shenyang(API 610 Petro-pump),each ofwhich manufactures pumps in strict accordance with the ISO9001,QA/QC standard, CE Mark, IQNet mark and other internal industrial standard. All these three plants are equipped with modern workshops where there are advanced equipment for manufacture, assembly, testing and maintenance. The detailed information about them are list below: 1. Shijiazhuang factory: general space floor: 8000m2, workshops: 4000m2, workers: 30; 2.Dalian factory: general space floor: 20000m2, workshops:10000m2, workers:80; 3.Shenyang factory: workshop: 1600m2, workers: 30. 4. Total: workshops: 15600m2, employees:160. Since its establishment, our company has been adhering to the principle of providing rich types of advanced pumps. Based on our years` experience in R&D and manufacture of pumps, we have developed many new types of pumps and parts, such as pumps made of hi-chrome material and A09, Ti and Ti alloy pumps and valves, horizontal froth pumps, huge BB2 pumps with self lubricationstation(equipped with Kingbury bearings) as well as carbon silicon bearings for VS4 pumps. As our R&D team have made breakthrough in several tricky technical problems, we now could provide to the market pumps which enjoy a maximum power of 1000kW and a maximum head of1000m and work smoothly at a high temperature of 400°C. More pumps of greater specifications will be developed in the future, meeting customers` increasingly higher requirements for pumping equipment.
In order to ensure that every pump and part we provide to you enjoy good quality and reliable performance, we have established a strict QA and QC system. Additionally, we could provide quality control records and related reports to our customers if necessary, such as "physical and chemical property report of materials for pump`s main parts", "rotor balancing report", "hydrostatic test report" and "pre-delivery inspection report". All in all, we take every link of the quality control serious, assuring that each pump to enjoy good quality and reliable performance.
Thanks to their good quality, rich types as well as highly reliable performance, our products have been exported to the foreign markets, such as Canada, US, UK,France, Australia, Czech,Poland, South-Africa,Argentina, Indonesia, Philippines,Kazakhstan, UAE, Pakistan and etc. At the same time, we have established cooperative relations with many international companies like Anglo American plc., Barrick Gold Corporation, BHP Billiton Ltd, Philex Mining Corporation, newmont africa mining Plc., KAZ Minerals, Kazzinc Group and India Aluminum mining and Fatima Fertilizer Company Limited and so forth.
The past nine years has witnessed our great efforts in the R&D and manufacture of pumps and parts. However, without your trusts and strong supports, we would never obtain what we have got nor become whom we are. Therefore, in the coming future, we will definitely exert more efforts in the development and manufacture of more quality products and provide more considerate and client-oriented services to you, moving forward along our way to greater success.