Find Ceramic Bearing Materials,Ceramic Shaft Sleeve Materials,Bearing and Shaft Sleeve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Pumps & Valves > XING KAI Ceramic bearing and shaft sleeve

XING KAI Ceramic bearing and shaft sleeve

  • XING KAI Ceramic bearing and shaft sleeve
  • XING KAI Ceramic bearing and shaft sleeve
  • XING KAI Ceramic bearing and shaft sleeve
  • XING KAI Ceramic bearing and shaft sleeve

XING KAI Ceramic bearing and shaft sleeve

    Unit Price: USD 3300.0000 - 3500.0000 / Ton
    Min. Order: 10 Ton
    Packaging: Export Carton/ Wooden Box
    Productivity: 100000T
    Brand: XING KAI
    Transportation: Ocean,Land
    Place of Origin: NING XIA
    Supply Ability: 10000T/M
    Certificate: ISO9001
    Port: TIAN JIN

Basic Info

Model No.: Ceramic bearing and shaft sleeve

Refractoriness (℃): 1770< Refractoriness< 2000

Feature: Long Time Materials

Type: Heat-Resistant Material

Shape: Block

Material: Silicon Carbide

Modulus Of Elasticity: 400 GPa

Compression Strength: ≥2000 MPa

Thermal Conductivity: 146 W/{M.K}

Volume Density: ≥3.10 G/cm³

HARDNESS: ≥2200 HV

Bending Strength: ≥360 MPa

Product Description

Products Introduction

Ceramic bearing and shaft sleeve under "XING KAI" trademark, adopts advanced pressureless sintered silicon carbide technology and can provide ceramic bearings in various materials, which are widely used in mechanical facilities magnetic drive pumps, canned motor pumps, multistage pumps, submersible pump, chemical pumps, centrifuges and valves etc.

The company can develop high-parameter, high-precision, high-performance silicon carbide ceramic bearing products according to customer's requirements.



This series of products are widely used for protection of body, vehicle armor, specialized building and various specialized vehicles.

Because silicon carbide materials has stable chemical properties, high thermal conductivity, low thermal expansion coefficient, low density, good wear resistance, high hardness, high mechanical strength and chemical corrosion resistance characteristics, so has developed rapidly in the field of materials.

Silicon carbide ceramics began in 1960s, silicon carbide was mainly used in mechanical grinding and refractories. However, with the development of advanced ceramics, people are no longer satisfied with the preparation of traditional silicon carbide ceramics. Various kinds of multiphase ceramics based on silicon carbide ceramics have appeared and improved the properties of single-phase materials,which making silicon carbide ceramics more widely in ceramic ball bearings, valves, semiconductor materials, measuring instruments, Aerospace, chemical and other fields.

Our company uses pressureless sintering to make silicon carbide ceramic products. The silicon carbide ceramic product is made by a compact of high performance submicron silicon carbide powder pressureless sintering material. It doesn`t contain free silicon and fine grain size. The purity of silicon carbide is more than 98%, and it has high temperature resistance, high strength, high hardness, high corrosion resistance, light specific gravity, oxidation resistance and other excellent properties. It is the first choice material for manufacturing mechanical seal ring, sandblasting nozzle, bulletproof armor and magnetic pump, shielding pump assembly at home and abroad. It is especially suitable for strong acid and strong base transportation of corrosive medium.

Ceramic bearing and shaft sleeve

Technological process

Powder Process―Suppression―Turn Milling―Sintering―Grindering―Polishing――Packaging――Shipment

Ceramic bearing and shaft sleeve

Transportation and package

1. Transportation and handling: During the transportation process, theCeramic armor Products shall not be dragged with hard materials. It should be light unloading to reduce packaging crushing.

2. Storage: The Ceramic armor Products should be stored in a cool and dry place, to prevent rupture of bags. Storage should away from sources of pollution.

3. Non-flooding: The Ceramic armor Products is easy brolen, so in the transportation, storage and the process, we must absolutely prevent carefully to insure the quantity of the products.

Industry


Certification

Customer ShowingContact information


  • 1
  • 2
  • 3
  • 4
  • 5
 


Ningxia Xing Kai Silicon Industry Co., Ltd.

Ningxia Xingkai silicon industry co.,Ltd is located in Taisha industrial park, Pingluo county, Shizuishan city. The industrial park is close to the Beijing-Tibet highway and Baotou-Lanzhou railway, and it is connected with 109 national highway and 201 provincial highway through Pingda Pingxi highway. The company was founded in May 2012,the registered capital is 6 million yuan. The company mainly engaged in deep processing silicon carbide products and international standard silicon carbide products. The products of coal-based activated carbon and carburant which used high-quality Ningxia Taixi anthracite as raw materials. In 2017, the company's operating incomes is more than 90 million yuan, including more than 40 million yuan foreign trade sales.The foreign trade export business is increased about 40% compared with 2016.

Since the establishment of the enterprise,we paying attention to scientific management and strategic development, focusing on the deep processing of silicon carbide business. The product lines from the primary particle processing has been extended to silicon carbide powder processing. In the leading position in Ningxia silicon carbide processing industry. Silicon carbide micro-powder revenues accounted for more than 80% of the enterprise sales income. We mainly adhere to export and our customers from all over the world, accordingly we have several long-term cooperation foreign enterprises and have been obtained good economic and social benefits.

The company constantly persevere in protecting the environment and taking the road of green development.The factory plant greening reached more than 90%. In June 2016, the company processed 20,000 tons silicon carbide powder. The Environmental Monitoring Station tested that dust and noise emission from the factory meet the national emission standards, and checked the supporting environmental protection facilities of the main project.Finally we obtain the acceptance report because of the acceptance conditions of environmental protection for the completion of the construction project.In 2018, our company and ....several products passed the German TUV certification, which makes our products are more competitive in the domestic similar products. It lays a solid foundation for our company to further development in the international market.

The company adheres innovative development to enhance the core competitiveness of enterprises. Innovation is the wellhead for the transformation and upgrading of silicon carbide industry to develop and improve of production technology. The enterprise product lines from primary particle processing to silicon carbide powder processing have been introduced the air flow abrasive production line and analysis machine pipeline and other domestic advanced production equipment, which in the leading position in this field. The high quality micro-powder silicon carbide products has low impurities, fine particle size characteristics. It has filled the blank of high-grade silicon carbide powder production in our country, and is the leader of silicon carbide production industry in Ningxia. The company has instantly transformed the equipment to improve the production efficiency and reduce the labor cost.

The company seized the opportunity to actively promote the industrial structure optimization and upgrading. In September 6th 2015,the company formally signed with the Alibaba Network Company, and Start to do cross-border e-commerce. Up to now, more than 40% products are traded online, and the annual turnover is more than ten million. In 2015, 2018, the company participated the largest biennial Europe's ceramic exhibition that held in Munich, Germany. This exhibition through publicity really makes the silicon carbide go to the world.

The company follow the [honesty and trustworthiness, quality-oriented, mutual benefit, pursuit excellence"business philosophy; [Demands different, Quality unchanged"as the aim has set a good example in social development. Ningxia Xingkai silicon industry co., Ltd. Will make great efforts to create high value products of silicon carbide and become a professional enterprise that specialized in silicon carbide in Ningxia. Our company will lay a solid foundation for the future development of the enterprises and make great contributes to our country.



Contact Information:Joyce Jin

Phone number:+86-18095225358

Customer Service Hotline:+86-0952-6620999

E-mail:salesmanager@xingkaisic.com



Company Info

  • Company Name: Ningxia XingKai Silicon Industry Co., Ltd.
  • Representative: Wei Dong
  • Product/Service: Silicon Carbon , Fine Powder , Activated Carbon , Sand , Silicon Carbon Sand of particle Size , Graphite Carburizer
  • Capital (Million US $): 6200000RMB
  • Year Established: 2012
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 1% - 10%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 5
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: no
  • Factory Size (Sq.meters): 1,000-3,000 square meters
  • Factory Location: No.3, Taissha Industrial Zone,Pingluo,Ningxia,China
  • Contact Person: Ms. JOYCE JIN
  • Tel: 86-0952-6620999
Email to this supplier
  • *Subject:
  • To:
    Jason Ren
    Mr. Jason Ren
  • *Messages:
    Your message must be between 20-8000 characters